Black Patch Stove Putty

At a glance

  • Ideal for fuel stoves and barbeques and installing fibreglass rope, filling holes, cracks or sealing flues.
  • Ensures smoke and gas tight joints.
  • Pre-mixed - ready to use
  • Air dries in 24 hours
  • Heat resistant to 1400 degrees C
  • Black in colour
  • Available sizes: 400g, 1kg, 2kg, 4kg, 8kg, 20kg & 35kg Tubs

Rubbedin Black Patch Stove Putty is a black coloured putty that is heat resistant up to 1400 degrees. It is ideal for installing fibreglass rope in fire doors, filling holes and cracks, sealing flues and grates or general repairs to fuel stoves and barbecues. It is pre-mixed, simple to use and air dries in 24 hours.

Share this product

Black Patch Stove Putty

At a glance

  • Ideal for fuel stoves and barbeques and installing fibreglass rope, filling holes, cracks or sealing flues.
  • Ensures smoke and gas tight joints.
  • Pre-mixed - ready to use
  • Air dries in 24 hours
  • Heat resistant to 1400 degrees C
  • Black in colour
  • Available sizes: 400g, 1kg, 2kg, 4kg, 8kg, 20kg & 35kg Tubs

Rubbedin Black Patch Stove Putty is a black coloured putty that is heat resistant up to 1400 degrees. It is ideal for installing fibreglass rope in fire doors, filling holes and cracks, sealing flues and grates or general repairs to fuel stoves and barbecues. It is pre-mixed, simple to use and air dries in 24 hours.

Share this product

  • How to Use
  • Tips For Your Fireplace
  • FAQ's

How to use Black Patch Stove Putty

  1. Clean the area to be filled/fixed removing any loose material & rust.
  2. Mix Black Patch Stove Putty thoroughly until even consistency is reached.
  3. Apply with putty knife or suitable tool.
  4. Allow 24 hours to dry.
  5. Keep lid tightly closed & store away from heat when not in use.

Safety

  • Never use petrol, oil or kerosene to help light the fire as they can cause an explosion.
  • If you have young children - a guard around any form of heating is a good precaution - Ask your dealer for advice on the best type.
  • Smoke detectors save lives. With or without a fireplace, a smoke detector is a good investment in your family’s safety.

Getting Started

  • Use kindling wood, paper and fire lighters to get the fire started. Large pieces of wood should be added after a bed of hot coals has been established.
  • Leave air controls open for 20 - 30 minutes to start the fire burning. You can expect some smoke from your flu when you first start but it should not last longer than 15 minutes.

Fueling your Fire

  • It’s important to get the fire hot as quick as possible & maintain it for the heating period.
  • Most heaters burn better with 3 or 4 logs rather than 1 or 2. Logs should not be too big -- 2kg to 4 kg or 40cm logs are typical.
  • Heaters with grates will perform better with a layer of ash on the base of the firebox, and should only need cleaning periodically. When cleaning out the ash, always leave 10mm or so behind.
  • Efficient burning only occurs when adequate air is supplied to the fuel. Leave air controls on for 15 - 20 minutes after reloading.

Overnight Burning

  • For overnight burning, load the heater at least half an hour before going to bed. Only turn the air supply down to a minimum once all the wood is charred  (about 15 - 20 minutes).
  • Most heaters should still burn for eight hours without difficulty and you will have far less creosote problems than if you fill the heater and turn it to slow burn straight away.
  • It will probably take you some time to get the feel of operating your heater for long periods. You might even find that once you have a good lighting method worked out and your house is well insulated you don’t need to burn overnight except on the coldest nights.
  • Do not close down air supply totally overnight - a little air avoids a lot of smoke.

Buying Fuel

  • It is always best, to use the type of fuel recommended by the manufacturer. If your heater meets the national emission standards, it will have a compliance plate which specifies the correct fuel to use.
  • Be sure of what you are buying or collecting in firewood.

Money Saving

  • Getting the best performance from your fuel and heater will save you money each year.
  • Make your home energy efficient by insulating the ceilings and walls.
  • Prevent heat leaks through cracks in doors and windows.
  • Reduce heat loss through windows by drawing heavy curtains at night.
  • Leaving the firebox open will affect the efficiency and reduce the heat output of your heater.

Wood Storage

  • Buy your wood in Spring or Summer as heaters operate best when wood is completely dry and well seasoned.
  • Store wood undercover in a dry ventilated area. Wood stored on pallets in a crisscrossed fashion allows air to circulate freely.

Service and Maintenance

  • The key to clean and efficient heating is not just installing an efficient heater, it is also operating and maintaining it correctly.
  • Whatever the age of your heater, use it correctly to reduce the need for repairs and servicing. Every heater has slightly different characteristics, so read and follow any instructions from the manufacturer carefully.
  • Service your heater during Spring or early Summer. This minimizes the corrosive effects of creosote residues and condensation during the off season.
  • Prior to winter, check the condition of the heater including the flu, door, seals and baffles. Specifically check for bird nests in or near the flu systems in the roof cavity. If loose insulation has been added to the ceiling check carefully that none has built up in the flu cavity clearance area.  Alternatively, have an experienced service person to do these checks.
  • Flues should be checked regularly by a chimney sweep.
  • Make it a habit to look outside and check your flu for smoke.

Based on text kindly provided by the Australian Home Heating Association Inc.

Is Black Patch Stove Putty suitable for outdoor use?

Yes, providing that it is fully air dried for at least 24 hours prior to getting wet.

Can pregnant woman use it?

Yes, anything that can cause fetal abnormalities has to be stated, by law, globally.

What temperature is the product effective to?

1400C

How long after applying product can I use my heater?

Blackpatch requires 24hours to air dry. You can use the heater after that.

I have young boys and the glass on the fire place has cracked so I am not going to replace it, can I use Black Patch to repair it?

Yes, if you don’t mind the black colour.

What is the difference between Hotspot and Black patch?

The colour (hot spot is a sandy colour, black patch is black – ideal for cast irons).

Do I Need to wet the bricks first?

Yes.

If not right consistency for required application, can I add water to product?

Yes but only very small amount – couple of drops only.

How do I clean up any spills?

Wash down with water, as this product is water based.

Do I need to wait until the woodburner/pipes are cool before I use the Black Patch?

Yes, the woodburner/pipes need to cool before application and wait 24hrs before starting the fire again.


Product Reviews

Log in or Register to write a review
No reviews yet for "Black Patch Stove Putty"

Related Products

Privacy Policy | Terms & Conditions | Shipping Policy